New Products

Pulse generator (crank position sensor) for the M20 & M40 engine, mounted at the timing cover to provide ignition and DME trigger signals.

Adjusting pulley for the M20 engine cam belt drive, used to set and maintain correct tension on the timing belt. We would generally recommend repla...

M12 x 1.5 threaded oil pressure switch, monitoring engine oil pressure and triggering the warning light when pressure drops below the safe threshol...

Sealing gasket for windscreen washer, headlamp washer, and rear window washer system components, preventing fluid leaks at pipe and nozzle connecti...

Throttle valve switch fitted to the throttle housing assembly on all M20 & S14 engines (Also S38)

18.5mm inner diameter stabilizer rubber mounting for the front anti-roll bar, securing it to the subframe and isolating road noise and vibration.

Gearbox rubber mount used in the gearbox suspension and mounting system to support and isolate the gearbox from the body structure. Fitment: E30 3...

Rubber mounting for the gearbox suspension, isolating transmission vibration from the bodyshell to reduce noise and harshness.  Suitable for M10, M...

Protection tube for the front or rear shock strut, shielding the damper rod from dirt, debris, and road contamination. Fitment: E30 – front spring...

Front additional shock absorber (bump stop / auxiliary damper) fitted within the front spring strut assembly to limit travel and absorb impact at f...

20 inner diameter rubber mounting bush for the front anti-roll bar (stabiliser bar), securing it to the subframe and isolating road vibration.

Rubber boot for the steering linkage, protecting the tie rod end joint from dirt and moisture. Both sides for cars without a steering damper. One ...

Water hose for the M20 engine cooling system, carrying coolant between the thermostat housing and the water pump.

Water hose for the M20 engine cooling system, routing coolant between the radiator and the thermostat housing.

Water hose for the M20 engine cooling system, connecting the expansion tank to the water pump on M20 models.

Water hose for the M10 engine cooling system, connecting the thermostat housing and routing coolant through the engine.

Water hose for the M40 and M42 engine cooling system, forming part of the coolant circuit on four-cylinder E30 models.

Water hose for the M10 engine cooling system, connecting the thermostat housing to the water pump.

Top radiator water hose for the M40 engine cooling system.

Coolant temperature sensor fitted to the cylinder head on M21 and M51 diesel engines, providing coolant temperature data to the DDE control unit fo...

Fuel pressure regulator for the fuel injection system on M42, M43 & M50 engines, maintaining consistent fuel rail pressure across varying engin...

Throttle position sensor (throttle valve switch) mounted on the throttle housing, signalling throttle position to the engine management system. Fit...

Engine coolant temperature sensor suitable for M10, M20 & M30 engines, (up to 1985 on E30 Models).

Temperature switch used in the cooling fan and air conditioning system circuits to trigger fan or relay operation at a set coolant or refrigerant t...